Nelson
-
Posts
450 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Nelson
-
-
It wasn’t a Studebaker. Just kidding.
-
Correct. He couldn’t get it to stay cool. I remember reading about that back in the early 70’s when the car was for sale in AOA magazine. I wonder how it does now?
-
Joe didn’t drive his Cadillac powered Avanti much. What was the problem he encountered.
-
I’ve had the ball joint on the linkage come apart. There are two of them.
-
Are you looking for standard or over size?
-
Throttle plate shaft in carb?
-
Guess is 1949.
-
Didn’t look that close before but it sure looks to be. Probably pretty tight fit clearance wise.
-
That R4 appears to be a later installation not the one I’m trying to locate. The windshield wiper motor gives it away as later than 1963.
-
I don’t know of any of the cars still in existence. I just know one of the engines still exist and is in storage at the museum.
-
Brad. I don’t think so. I’m sure they were blue printed and probably lose but until someone opens one up it will be a mystery. However, one does exist, we know that.
-
There were two six cylinder cars at Bonneville, #6 and #7. Their engines were assigned a B# just like the R3 and R4’s. Also, their B numbers just happened to fall where they may in the B production sequence.
-
Brad is right. The magnesium impellers did not survive well. Stored in a damp spot they will corrode to nothing.
-
Yes, #1 and 2 are both R3 car. Those two I own. There was also a R4 convertible. Serial number 1 convertible was a build mule for the 64 convertible and was actually built on a frame with no X member. I don’t think this car was ever intended to leave Studebaker and sold to the general public. However, in the total confusion at the end, Paxton ended up with the car and sold it. Paxton took advantage of no X member as the car was a little lighter than the sister car. It was equipped with a 3.31 gear as opposed to a 3.07 and was used for the standing start runs. The other car, #2, was used for long range runs and had the 3.07.
-
That isn’t raised it’s stamped. Looks totally legit to me.
-
I own two of the convertibles.
-
I thought you meant howmany records still stand
-
That is an interesting question. I doubt if many are still standing. Maybe none.
-
Probably 10?
-
False. Higher stall speed more fluid shear.
-
Good method.
-
Typically the wet front carpet on the Stude Avantis isn’t weatherstrip but rather from clogged or non functioning cowl drains. The water coming in through the cowl vent behind the hood drains down into the side of the cowl in front of the doors. It overflows out the lower hinge pocket down onto the threshold rubber and into the car. You can access this area for cleaning through the vents in the footwell. Try putting a hose through the cowl grill and see if the water runs out the bottom of the fender.or ends up running into the car. These drains were very often bondoed over when new.
-
Agree
-
6 hours ago, mfg said:
That's a hell of an interesting photo Nelson...I sure wish it was clearer!
I do to. Now, if I could just find the one I remember seeing years back.
Bonneville Studes!
in Avanti Trivia
Posted
No, that was the #1 R3 convertible. No X member in that car.