DaytonaR2
-
Posts
40 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by DaytonaR2
-
-
I need the "S" emblem that is in the middle of the seat at the top. Held on by one speed nut.
-
Excellent condition, no leaks, no issues. $200 includes shipping within USA.
-
Excellent condition, no leaks, no issues. $200 includes shipping within USA.
-
I would be interested in the door panel stainless trim.
-
Found one
-
The two wires are swapped on one of the turn signals. Which creates an improper ground
-
I am looking for a passenger door panel to get the curved stainless trim piece. Will buy complete panel or just the stainless trim piece.
-
They are from the 1970 or so, they are Mercedes. They are all over eBay
-
I used flush head aluminum aircraft rivets to put the fuzz back on. Worked quite well
-
I bought the fiberglass headliner panels and then covered the face with material. I simply glued the material to the fiberglass panel. They look great]
-
It found a home in Utah with Robert.
-
Anyone wanting an automatic trans that was working fine is welcome to it. Just needs to picked up in Woodland, CA. I won't ship. I put in a 700r4 to have overdrive.
-
Jerry has lied several times saying they were being shipped Thursday. No replies to phone, email or text. I am out $1083. Avoid. BBB has many complaints and now mine too...
-
Still has not created my seats. He had no problem taking my money. I have demanded a refund and there is no response. It has been almost a year now.
-
I have the Protofab bracket and it is too tall for my 64 Avanti. The hood hits with the compressor installed. I ended up making my own. I will sell the Protofab bracket for half price if someone can use it on another Stude.
-
count me in
-
Jerry called me back. They are on the way. He has been out on a medical leave.
-
Does anyone know where I can have seat covers made? Auto Custom Leathers INC. owned by Jerry Zalucki appears to have taken my money and then closed their doors.
-
You are my hero! Thank YOU
-
I am trying to remove the rear sear armrests to reupholster but other than three crews I see no other attachment points. What am I missing? Also what holds the rear sail panels to the body other than the side rear windows? Any picture perhaps
-
The oil pan will hit the inner tie rod ends if you try to use them.....I tried. Went to normal height one.
-
Other than the rear windows what holds the rear interior sail panels to the body? Are they glued? Getting ready for paint and I need to remove rear exterior emblems. -
Ditch the resistor as that was only for original points system (to save points). Electronic distributor needs 12 volts as a constant.
-
Very easy job to do yourself with the rebuild kits. These are Bendix units, so YouTube has plenty of guidance. Early mustangs and corvettes used basically the same units except for the hose connection points. Hard part is getting the units off of the car.
Heater core
in Avanti Parts
Posted
Yes, heater core