Jump to content

Whlnut

AOAI Forum Members
  • Posts

    12
  • Joined

  • Last visited

Posts posted by Whlnut

  1. I need a set of seat tracks and sliders to fit a '63 Avanti.   Also looking for a very nice early style hood support, 1336801, or has anyone found a suitable replacement from another vehicle? Atwood made a lot of this type support for various cars in the 50's and 60's.  Another option for me would be hood struts that are known to work on Avantis.

    Thanks, Ed
    Brunswick, Ga 31523

  2. Selling the 289 R1 engine complete with AC and P/S from my '63 Avanti R-2185, and PowerShift trans. with torque converter, cross member and driveshaft.

    A head gasket failed while the car was garaged and water damaged one cylinder, so a standard overhaul will be needed. The car ran and drove fine until then, with no other repairs needed. Selling the complete engine, less the ignition shields, aluminum water pump pulley and air cleaner assy., which are available separately.  Includes the York compressor, power steering pump, AFB, nice valve covers, etc.  Upgrades include Honda alternator, Chrysler electronic ignition. 

    The transmission will need new seals and gaskets.                                                                                                                                                                                                                                                                                                                                                                                                                                                                 
    $600 for the engine and $200 for the trans. Pick up only in Brunswick, GA.  I have many other excellent parts from this car that I will list in another post.  Ed Lanier 912-223-48 eight one. Text first.
     

  3. Others have noted lower temps after installing the Saturn air dam on the bottom of the radiator core support. Supposedly, the dam causes turbulence that helps cool the tunnel and underside of the floor, and increases air flow through the radiator. I plan to add one to my '63 if I can ever find one. What I am doing is insulating the tunnel and floor pan with DEI heat shield, which is made for use under the car. With that and insulation throughout the interior, it should be cooler and quieter inside, although I'm a few months away from driving it.

  4. I'm restoring my '63 R1 and have the front suspension apart. The service manual shows how to set alignment, but I don't see how turning the eccentric pin can set both caster and camber. I also don't see why the hex adjuster on the pin has to be in the rear.  Please help set me straight.  Thanks, Ed

     

×
×
  • Create New...