Jump to content

Replacement headlights and fog lightsog


edprize

Recommended Posts

  • 4 years later...

How did you remove the old lights to replace them.  I have looked at mine to replace with LED as you have but cannot figure out how to access them to pull the old ones out.

Thanks,

 

Link to comment
Share on other sites

You have to remove the entire headlight bucket assemblies from the backside if you want to replace the lens and reflector. Access is easier if you first remove the front wheels and inner front fender liners. There are three thin metal straps that hold each bucket in place. Removing the three nuts and bending the straps out of way releases the bucket.  While you are under there make sure the straps are still firmly glued to the fiberglass front panel as this is a very weak spot in the design. Once you have the buckets out of the car it will be obvious how to switch the lens/reflector.

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...