chdonley2 Posted February 27, 2019 Report Share Posted February 27, 2019 I need to convert the tapered axles on my '63 R-1 road race Avanti to flanged axles. Is it possible and what is required for the conversion?? I searched the forum and saw maybe it had been done but couldn't find any examples of how. http://tinypic.com/m/jiywat/1 Thanks, Chuck Donley Link to comment Share on other sites More sharing options...
PackardV8 Posted February 27, 2019 Report Share Posted February 27, 2019 Fairborn Studebaker has the axles. jack vines Link to comment Share on other sites More sharing options...
mfg Posted February 27, 2019 Report Share Posted February 27, 2019 Later Avanti ll's ('78-'85) used a flanged axle Dana 44 which would be a bolt-in. Link to comment Share on other sites More sharing options...
chdonley2 Posted February 28, 2019 Author Report Share Posted February 28, 2019 What other parts are required to install the axles in my 63 rear end?? Link to comment Share on other sites More sharing options...
1963r2 Posted February 28, 2019 Report Share Posted February 28, 2019 Hello Chuck I believe Fairborn supply you with a kit (everything you need) and instructions to fit the axles. pb Link to comment Share on other sites More sharing options...
silverstude Posted February 28, 2019 Report Share Posted February 28, 2019 here are a few notes http://www.studebaker-info.org/rjtechdec2017p1g.html#Moser Link to comment Share on other sites More sharing options...
ron@crall.com Posted February 28, 2019 Report Share Posted February 28, 2019 16 hours ago, mfg said: Later Avanti ll's ('78-'85) used a flanged axle Dana 44 which would be a bolt-in. My 71 has flanged axles. Good idea to change. Had 1 taper break on my 63 and 2 on a 60 Hawk. No fun with single master cylinder. Link to comment Share on other sites More sharing options...
Gunslinger Posted February 28, 2019 Report Share Posted February 28, 2019 My '70 has flanged axles as well. I know of at least one later Avanti with tapered axles. It seems during assembly the parts guy pulled whatever axles were easy to get...not use up old stock first. Link to comment Share on other sites More sharing options...
chdonley2 Posted March 1, 2019 Author Report Share Posted March 1, 2019 calling Fairborn tomorrow. thanks all. Link to comment Share on other sites More sharing options...
mfg Posted March 2, 2019 Report Share Posted March 2, 2019 On 2/28/2019 at 5:35 PM, Gunslinger said: My '70 has flanged axles as well. I know of at least one later Avanti with tapered axles. It seems during assembly the parts guy pulled whatever axles were easy to get...not use up old stock first. I agree!.....My '73 Avanti (RQB1967) has the TAPERED axle shafts! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now