Jump to content

mfg

AOAI Forum Members
  • Posts

    12,273
  • Joined

  • Last visited

Everything posted by mfg

  1. mfg

    Avanti Change!

    No, not quad headlights!
  2. mfg

    Avanti Balls!

    Any other thoughts here?🤔
  3. The front oil pump in a Studebaker Avanti Powershift transmission produces higher pressure than a 'normal' Flightomatic front pump......True?
  4. Eightyish Avanti ll power antenna switches were usually located to the .....?..... of the car's steering column.
  5. After the fact, Studebaker Avanti designer Bob Andrews would have liked to have seen one major change in the Avanti's frontal design...What was the change?
  6. The planatery race balls in a Paxton 'SN' Supercharger are each .....?...... in diameter.
  7. Avanti designer Bob Andrews once described the rather unusual fuel inlet intrusion into the passenger compartment of a 1963 Studebaker Avanti as .......?.......
  8. If you intend to change out the block, any late '62-'64 289 Stude V8 would make a good starting point.
  9. Yes!... the play in the bellcrank is normally the major cause for what you're describing...There should be 'zero' up and down play in steering bellcrank....Also, check tightness of pinch bolt holding bellcrank to center pin.
  10. Wasn't Paula almost killed in a rocket powered dragster?
  11. mfg

    Paxton Kit!

    Interesting setup!.. Height of unit would be a problem on many vehicles.
  12. mfg

    Paxton Kit!

    Yes, true it is!🙂
  13. mfg

    Paxton Kit!

    Paxton Products once offered a 'Brand X' supercharger kit which featured the carb positioned on the INTAKE side of the blower......True? (ball drive, 'SN' type supercharger)
  14. Dan Booth would probably have them... ( Nostalgic Avanti parts)
  15. mfg

    Avanti Impeller!

    Pretty much the area of impeller visibile when viewing supercharger from the rear.
  16. mfg

    Avanti Impeller!

    Yes, THAT'S the answer!! 🙂
  17. mfg

    Avanti Impeller!

    HINT!.....Change two of the letters in Brad's "infuser" answer, and you're there! 😉 ,
  18. mfg

    Avanti Impeller!

    Good thought, but not "Hub" ! 🤔
  19. mfg

    Avanti Impeller!

    CLOSE...but no cupie doll! 🤔
  20. mfg

    Avanti Impeller!

    I couldn't have said it better myself, however, NOPE!
×
×
  • Create New...